| How-To Locally install Plug-ins in image 6.5.x |
| Objectives
This document provides a step-by-step description of local Plug-ins installation in image 6.5.x.
The method taught for pl... |
| Apr 15, 2007 - http://www.chippc.com/?kb=734 |
|
| Configure the RDP / ICA connections to run on startup on image 6.5.x |
| Objectives
This document explains how to configure the RDP / ICA connections to run on startup on image 6.5.x, both locally and through Xca... |
| Mar 8, 2007 - http://www.chippc.com/?kb=576 |
|
| Add a non-standard printer |
| Objectives
This document explains how to locally add non-standard printers, both parallel and USB.
... |
| Mar 8, 2007 - http://www.chippc.com/?kb=70 |
|
| Enable Seamless Window in an ICA session in image 6.5.x |
| Objectives
This document explains how to enable seamless window mode in an ICA session on the client side in image 6.5.x.
... |
| Mar 8, 2007 - http://www.chippc.com/?kb=592 |
|
| Using the Smart Card Logon Plug-in |
|
The objective of this document is to provide the technical knowledge and understanding that is required to correctly and effectively use the Smartcard Logon plug-in on Chip PC thin clients.
|
| Mar 27, 2007 - http://www.chippc.com/?kb=723 |
|
| How To Perform License Installation Remotely Using Xcalibur XP |
| Objectives
An XPI License file enables the use of a specific XPI on a specific device. License files are generated based on the device MAC a... |
| Mar 8, 2007 - http://www.chippc.com/?kb=126 |
|
| How to Use Xcalibur Global to Enable the Use of an Elo Touchscreen on TCs |
| Objectives
This document explains how to use Xcalibur Global to enable the use of an Elo touchscreen on TCs.
This procedure is base... |
| May 30, 2007 - http://www.chippc.com/?kb=735 |
|
| How to Perform a Firmware Upgrade via the Task Allocation Wizard |
| A How-To Movie is a short visual presentation of how to perform specific tasks on either Xcalibur Global or Thin-Client Device.
This movie teaches How to Perform a Firmware Upgrade via the T... |
| Mar 8, 2007 - http://www.chippc.com/?kb=689 |
|
| How to Remote Control a Client Device (VNC) via Xcalibur Global |
| A How-To Movie is a short visual presentation of how to perform specific tasks on either Xcalibur Global or Thin-Client Device.
This movie teaches How to Remote Control a Client Devic... |
| Mar 8, 2007 - http://www.chippc.com/?kb=694 |
|
| How to Create an ICA Connection with Support for Audio via Xcalibur Global |
| Objectives
This document teaches how to use Xcalibur Global to create an ICA connection with support for audio on the client device.
... |
| Mar 8, 2007 - http://www.chippc.com/?kb=47 |
|
Login
| Partners | Contact 
