====== Agent Logs and Configuration Files ======
----
===== Configuration Files =====
----
The **Xcalibur W** Agent configuration file is named //chippc.config.xml// and is located in the following folder:
**C:\Program Files\XcaliburW\XcaliburW Device Agent\Device Agent\bin**.
|{{:warning.png |}} The EWF Write Filter must be disabled before changing the //chipc.config.xml// file. This is not required with the FBWF Write Filter, as the XcaliburW Device Agent\Device Agent\bin folder is part of the FBWF exclusion list.|
Among others, the following settings are useful to know:
__**Proxy settings:**__
If the client device requires a proxy to communicate with **Xcalibur W**, the proxy settings must be specified in the //XcaliburW.config.xml// file:
* URL : The IP address or DNS name of the proxy server. To specify a specific port, use the **:XXXX** notation, where //xxxx// is the port number.
* Login : Login string to authenticate with the proxy server.
* Password : Password string to authenticate with the proxy server.
Example :
__**Xcalibur W Server Address**__
The **Xcalibur W** Server address can be changed by editing the following line in the //XcaliburW.config// file:
|{{:warning.png |}} If the Xcalibur W server address is set to HTTPS, then the SSL Certificate must be available in the /bin directory to enable communication between the client and the server. For further information on certificates, refer to the [[:enrolling_client_devices:discovering_new_clients:manually_configure_the_client|Manually Configure the Client]] section.|
===== Agent Logs =====
----
**Xcalibur W** Agent log files are located in **C:\Program Files\XcaliburW\XcaliburW Device Agent\Device Agent\bin**. Log files begin with "**Logs.**" The current log file is **Log.Service.xml**.
{{ logs:agent_logs_and_configuration_files.png }}
An example log entry is shown below:
Server respond successfull (AckCommands)
Received 1 tasks