====== Integration into IIS ======
----

===== General Remarks =====
----

**Xcalibur W** Server is accessed via a web interface hosted by **Microsoft Internet Information Service** (IIS). To install and run **Xcalibur W**, you will complete the entire configuration through the Windows MMC administration console.

Open the Windows MMC administration console by typing the following in the **Start** menu search box:

    >mmc compmgmt.msc

The image below shows the administration console interface.

{{ iis:Integration_into_IIS.png }}

In the tree on the left, expand //Services and Applications// and select **Internet Information Services (IIS)** manager. When the IIS interface loads, you will see two sections in the window: The **Pools and Sites** tree on the left, and the management interface on the right. The management interface is specific to each site or pool selected in the tree.

===== Add the Xcalibur W MS Application Pool =====
----

Select **Application Pools** in the //Pools and Sites// tree. Then, in the //Actions// menu, select **Add Application Pool**.

{{ iis:add_application_pool.png }}

Configure the fields as shown below:

    ***Name** : **Xcalibur W MS**
    *Select **.NET Framework version**: with **.NET Framework v4.0.30319**
    *Select **Managed pipeline mode**: with **Integrated**
    *Tick **Start application pool immediately**

Right-click on the Xcalibur W MS application pool and then select **Advanced settings...**

    *Set //Enable 32-Bit Applications// to **True**

{{ iis:add_app_pool.png }}

===== Add the Xcalibur W Management Server Site =====
----

**Caution** : Deactivate any site that uses HTTP and/or port **80**.

Select **Site** in the Pools and Sites tree, and then in //Actions// select **Add a Web Site.**

{{ iis:Add_Server_Site.png }}

Configure the fields as shown below:

    ***Site Name** : **Xcalibur W Management Server**
    ***Pool** : **Xcalibur W MS**
    ***Physical path** : **C:\Program Files\XcaliburW\XcaliburMS**
    ***Binding** : **https** and port **80**

===== Secure Mode =====
----

**Xcalibur W** must be accessible in secure mode for communication with agents, which means an SSL certificate must be installed. If you do not already have a certificate, you can generate one.

Select the **Xcalibur W Management Server** site in the //Pools and Sites// tree, and then, in the menu, select **Edit Binding**.

{{ iis:secure_mode1.png }}

Click **Add...**.

{{ iis:secure_mode.png }}

Select **http** in the //Type// drop-down, set the port to 443, and then select the SSL certificate you previously added.