ChipPC - Xcalibur W Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== Xcalibur W Tray ======
----

===== Functionning =====
----

The **Xcalibur W Tray** is an windows application designed to run in the Windows Taskbar. It appears as a system icon : {{:wpdaon.ico|}}\\

The Xcalibur W Tray icon can have different color based on the status of the Xcalibur W agent as described in this [[installation_guide:client_software_installation:invoking_the_software|section]]

The **Xcalibur W Tray** can be identified in the process list under the following exe name : **XcaliburW.Notification.Windows.exe**

**Xcalibur W Tray process is used whenever an interaction with the desktop session is required. Therefore, the Tray is required for the following commands :**

^  ^  ^  |
|[[commands_glossary:commands_to_multiple_devices#launch_application|Launch Application]]  |Start connection |Stop connection |
|[[commands_glossary:commands_to_multiple_devices#display|Configuration Displays]] |[[commands_glossary:commands_to_single_device#screen_saver|Configuration Screensaver]] |[[commands_glossary:commands_to_multiple_devices#messaging|Notification]] |


As the Xcalibur W Tray is system application running on explorer, if the explorer is not started, then the Xcalibur W Tray will not be operating. As a result any command requiring the Xcalibur W Tray will fail. This is the case when there is **no user logged** in on the device or when the device is in **Maintenance mode**.
===== Issue And Resolve =====
----

==== Issue ====
----
You may face an error as shown below : 

{{ advanced:error-tray1.png }}

==== Resolution ====
----

=== Case 1 ===
----

The target device is not in Maintenance Mode\\
You have sent one of the following commands :

^  ^   |
|Launch Application  |Notification |
|Configuration Displays |Configuration Screensaver |

The reason for the error message can be explained if:

  * There are no Windows Session opened up on the device - or the windows session does not have the explorer as shell
  * The Xcalibur W Tray has failed to start

=== Case 2 ===
----

The target device is not in Maintenance Mode\\
You have sent one of the following command :

^  ^   |
|Launch Application  |Notification |

While in Maintenance Mode, the Xcalibur W Tray is not started as there is no explorer. These above commands can not be executed during Maintenance Mode.

=== Case 3 ===
----

The target device is not in Maintenance Mode\\
You try to start an Connection RDP created by Xcalibur W server\\

The Xcalibur W Tray may not have started correctly.\\
ChipPC - Xcalibur W Wiki

User Tools

Site Tools

Page Tools
