ChipPC - Xcalibur W Wiki

For Server 2.14.x & Agent 2.14.x

User Tools

Site Tools


manual_enrollement

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

manual_enrollement [2017/12/21 13:10]
manual_enrollement [2021/11/21 16:00] (current)
Line 1: Line 1:
 +====== Manual Enrollement ======
 +----
 +
 +Enrolling Devices can be performed using the Manual Enrollment. From the **Device Enrollement** page, you can select which devices you wish to enroll. Of course, if you had many thousands of devices you may find it difficult to find the device, and so we have provided a filter system for displaying un-enrolled devices.
 +
 +{{ manual_enrollement:​1.png }}
 +
 +Enrollment Status allows ​ three different **States** :
 +
 +  * {{manual_enrollement:​2.png}} means the unit is already Enrolled
 +
 +  * {{manual_enrollement:​3.png}} means the unit is not yet Enrolled
 +
 +  * {{manual_enrollement:​4.png}} means the Enrollment process is ongoing
 +
 +You can select the devices you wish to enroll and click the enroll button located on the bottom status bar. You can also use the right-click context menu.
 +
 +{{ manual_enrollement:​5.png }}
 +
 +
 +|{{:tip.png |}} Enrollment takes a couple of minutes and this is due to the inventory of the device being registered. In addition, enrollment also uses up one license from the license pool.|
 +
 +Once Enrolled, the Device is automatically added to the Device List page and can then be managed.
 +
 +Be aware that before being fully functionnal,​ the Device will need to create its first Inventory. This process may takes some minutes. During this timeline, some data will be missing and therefore the corresponding line in the Device List will feature some empty fields as shown below.
 +
 +  * Device that has not yet finished its Inventory
 +{{ manual_enrollement:​no_inventory.png }}
 +
 +  * Device that as finished its Inventory
 +{{ manual_enrollement:​inventory_done.png }}
 + 
 +